Free Shipping on Orders $39.95 + No Tax (Except California)

Hot Tubs (hot tub types) vs. Spas Explained

Hot tubs and spas are getting increasingly more famous and they are to be found in many houses! When you mention hot tubs and spas, what springs to the general public's minds is an above ground acrylic spa. Let’s take a closer look here. Frankly speaking, terms spa and hot tub are generally used interchangeably. What you need to know is that there are essentially two major categories of hot tubs or spas: in-ground (custom spas) or portable spas.

In-ground Spa

The in-ground spa is absolutely a spa/bath mixture and can be pretty pricey. This sort of spa is designed to maintain as many as 16 human beings despite the fact that there are smaller sized spas. If making a decision to have this type of spa/warm bath then you will have it professionally established, because it involves a fair little bit of production work in addition to the plumbing and electric abilities wanted. You may additionally need to get planning permission to have an in-ground spa. The water in a ground spa is heated from a separate electrical or gasoline unit. Once you have an in-ground spa it is very difficult in case you need to transport it someplace else.

Portable Spa

The acrylic spa is the most famous one available on the market as it is quite big and can accommodate up to ten people. Acrylic spas are self-contained devices that commonly want a concrete pad for help. And when it comes to powering your hot tub, you have two basic options: 110v and 220v. Most hot tubs require a 220v electrical hookup—which for most people means you have to call an electrician and have new wiring done. However, there are portable spas called, Plug & Play Spa, that run on standard 110V power, which can be plugged into most standard household power sources without the need for additional wiring. These models are quite smooth to install and they tend to have a fairly long life and include an extended assurance.

Except for acrylic, portable spas can be made from:

  • Fiberglass
  • Inflated latex or vinyl
  • Polyethylene and other plastics

Probably the least pricey type of spa is an Inflatable Hot Tub. These tubs are normally made to deal with 2 to 4 human beings but can fit up to 6 people. This type of pool is meant to be transportable and so they are quick and easy to install. If you do not have lots of room to spare, then this form of the spa is perfect! It plugs into a fashionable 110-volt outlet and can be used out of doors or internal.

Although transportable, plastic hot tub tends to be less durable in comparison to acrylic Plug & Play Spas. If you need something a piece even more everlasting, then an in-ground tub is a higher buy.

Whatever sort of hot tub or spa you make a decision on will depend on how lots area you need to spare, your budget, and whether or not you need it only for your very own use or whether it will likely be used for parties, events and so on. If you are having yours installed for health motives, then you will want something that is big sufficient to allow for movement and exercising.

Leave a comment

Please note, comments must be approved before they are published